Retrieving Module Settings

Modules configurations are stored in the host parent configuration structure under a modules key according to their name. To retrieve them you can do

  • getModuleSettings( module ) : Returns the structure of module settings by the module name.
  • getModuleConfig( module ) : Returns the module's configuration structure

Injecting Module Settings

You can also use our injection DSL to inject module settings and configurations:

// Inject all module settings
property name="settings" inject="coldbox:modulesettings:{module}";
// Inject the module configuration structure
property name="config" inject="coldbox:moduleConfig:{module}";
// Inject a single module setting
property name="customSetting" inject="coldbox:setting:customSetting@{module}";

The injection DSL pattern is the following:

  • coldbox:setting:mySetting@module : You can now inject easily a module setting by using the @module directive.
  • coldbox:moduleSettings:{module} : You can now inject the entire module settings structure
  • coldbox:moduleConfig:{module} : You can now inject the entire module configuration structure

Overriding Module Settings

If you have parseParentSettings set to true in your ModuleConfig.cfc (which is the default), ColdBox will look for a struct inside the moduleSettings struct of your config/ColdBox.cfc with a key equal to your module's this.modelNamespace (default is the module name) and merge them with your modules settings struct (as defined in your module's configure() method) with the parent settings overwritting the module settings. This allows a user of your module to easily overwrite specific settings for their needs.

// myModule/ModuleConfig.cfc
component {
  function configure() {
    settings = {
      someSetting = "default",
      anotherSetting = "default"
    };
  }
}

// config/ColdBox.cfc
component {
  function configure() {
    moduleSettings = {
      myModule = {
        someSetting = "overridden" 
      }
    };
  }
}

// end result
{
  someSetting = "overridden",
  anotherSetting = "default"
}

If parseParentSettings is set to false, your module's settings will instead overwrite the settings set in the same moduleSettings struct.

Using Overridden Settings in your ModuleConfig.cfc

If you want to use the overridden settings in your ModuleConfig.cfc, you will need to use it in the postModuleLoad interceptor. Remember, all your modules register the ModuleConfig.cfc as an interceptor, so all you need to do is add the postModuleLoad function and you're off!

function postModuleLoad( event, interceptData, buffer, rc, prc ) {
  binder.map( "MyAlias@MyModule" )
    .to( "#moduleMapping#.models.#settings.moduleName#" );
}

results matching ""

    No results matching ""